UNITRONIC 4.0TFSI EA825 STAGE 3 TTE1020 ECU & TCU SOFTWARE & UNICONNECT+
3,125.00$
Share Product :
Description
UNITRONIC STAGE 3 TTE1020 ECU SOFTWARE & UNICONNECT+ OBD CABLE
UNITRONIC STAGE 3 BT : 936HP / 830LB-FT 98 RON FUEL (93 OCTANE)
ECU Features
- Optimized Responsiveness, Smoothness, Drivability, and Comfort
Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration. - Ignition Timing Precisely Calibrated for Higher Octane Fuel
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved. - Optimized Maximum Output
Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components. - Factory Safety Limiters Retained
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability. - Power Delivery Perfectly Optimized Throughout the Power Band
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. - Speed Governor Removed
Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.) - Standing RPM (soft) limiter increased from 3k to 5k RPM
Once the vehicle has reached FULL operating temperature, it can be revved to a maximum of 5k RPM in Park or Neutral. - Improved Fuel Efficiency
Optimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions. - Engineered with Strict Industry Standards
With over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. - Extensively Tested Under Various Driving Conditions
Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.
Description
This Performance Software, paired with the proper required hardware and software listed below, is the ultimate upgrade for your car.
With endless hours of development and optimization, power delivery is smooth with dramatic performance on tap
- Unitronic Engineers identified gearbox originating torque limitations on the TCU side of the AL952 trasmission. In order to overcome these limitations, while ensuring proper torque management and operation, a TCU Performance Software was required to run Unitronic Stage 3 ECU Performance Software for TTE1020 Turbochargers.
Stage 3 TCU Performance Software calibrations necessarily increase the torque limiter to 1300Nm for seamless torque management and harmonious operation with the corresponding Unitronic ECU calibrations and further enhance the user experience.
These software upgrades are entirely compatible with our UniCONNECT+ cable, empowering Clients to tune their vehicles directly through the OBD-2 port within minutes,
Performance Software for your ECU & TCU Box Code is subject to availability, Please contact us before purchase to confirm vehicle-specific details and compatibility.
Included are
- STAGE 3 TTE1020 ECU & TCU SOFTWARE
- UniCONNECT+ OBD Interface
UniCONNECT+ is a Programming and Diagnostic Interface that gives end-users the freedom to reflash their Transmission Control Unit (TCU) or Engine Control Unit (ECU)
from the comfort of their own garage anywhere in the world. With the ability to upgrade the Unitronic Performance Software or flashback to stock, also features to perform diagnostics.
UniCONNECT+ is a complete end-user programming and a diagnostic interface that provides control over your vehicle.
-
UniCONNECT+ gives you the freedom to effortlessly install your Unitronic Performance ECU and DSG Software from the comfort of your own home or garage.*
- Flash port (OBD-2 Port) compatibility
- Quickly and Easily re-flash your ECU with Performance Software maps designed and specifically calibrated to suite the hardware and fuel modifications or fuel grade used.
- Gathering high-resolution data is made easy with Unitronic’s pre-configured channel load-outs for fast and effortless troubleshooting and data logging.*
- Allows you to read and clear DTCs once you resolved them
- UniCONNECT+ makes it painless to revert your ECU back to its stock calibration within minutes.*
- TTE1020 4.0TFSI EA825 Turbochargers
- Sharp motorsport 4 Bar TMAP Sensor Upgrade Kit for 4.0TFSI EA825
- Carbon Fiber Intake & TTE1020 Turbo Inlets for C8 RS 6/RS 7
- Intercooler Upgrade for C8 RS6/RS7
- Unitronic Performance Downpipes for C8 RS 6 and RS 7
